Daytona Beach Auto Repair

This may have happened to you.  You drive somewhere and get out of your vehicle only to try closing the door and it just won't stay closed!  What a helpless feeling.  You can't lock it; you can't leave it like it is. Or, let's say you head down to your vehicle to head out to work in the morning and you can't open the door.  What are you going to do now? Vehicle doors take a lot of abuse.  They are opened and closed hundreds of times and we expect them to just keep working perfectly all the time.  They do require a bit of tender loving care.  Let's take a look at two different scenarios of stuck doors. First: the door that won't close.  It's a security issue.  It's also a safety issue.  You can't really safely drive a vehicle with a door that won't close. What if you or a passenger is tossed out?  Sure, some people try to tie a stuck-open door closed or bungee it, but that's dangerous.  It's best to get that vehicle to the serv ... read more

You may have heard at one time or another about something called a timing belt or timing chain in your engine.  And you may know that if they fail… well, let's just say that there can be some major engine damage.  So obviously, we want our timing belts and chains to be in tip-top shape. One part that helps keep them running the way they should is the timing cover.  As you can probably guess, it's something that covers the belt or chain.  The timing cover protects both belts and chains from dirt and road debris.  Timing belts also need to be lubricated so their covers allow them to be lubricated as well.  They have a gasket that insures a good seal for the engine.  If that gasket breaks or develops a leak, then engine oil can escape, and loss of lubrication is never good for an engine component. Other symptoms of a failed timing cover are leaking coolant, a metallic sound coming from the front of your engine or your Check Engine light coming on ... read more

When it comes to your vehicle, driving it too much can cause some issues.  But what about not driving a vehicle enough? That has consequences as well. Here are a few things that can happen if a vehicle isn't driven enough.  When the engine doesn't operate, the oil isn't lubricating. That means some mechanisms that need periodic lubrication aren't getting it.  And oil that sits around breaks down over time.  In fact, some experts say you should change oil more often if your vehicle sits in the driveway than if you drive it regularly.  You've heard that expression, "Take it on the highway and blow out the engine.” Well, carbon buildup used to be a problem in older vehicles.  But the real culprit these days is moisture that builds up from combustion if your vehicle never gets hot enough to burn it off. That water vapor can mix with oil and cause sludge to form. There are many vehicle systems (battery, exhaust system, engine seals, etc.) that benefit fro ... read more

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap. Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it. Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand ... read more

As the temperatures plunge, certain types of engine oil may not flow as easily as they did when it was warmer.  Makes sense, doesn't it? Just like molasses gets thicker as the temperature goes down, engine oil does the same thing. So, maybe you're wondering if you have to change your oil as the seasons change so it's just the right thickness to lubricate your engine parts.  How well engine oil flows is called its viscosity. There are different types of oil—some that have just one viscosity and others called "multigrade" oils.  Here's the difference. A single viscosity oil will flow better when it's hot but not as well when it's cold.  A multigrade oil is engineered so that its flow properties at cold temperatures are different than they are at warm temperatures.  In other words, a multigrade oil can start out in colder temperatures acting like a thinner oil and then behave like a thicker oil when it's warm.  That's a pretty cool trick and it's why mu ... read more

Most of us look forward to spring because the days are longer, the weather's warmer and we can finally get our vehicles into warm weather mode.  Here are a few things that will breathe fresh energy into anyone's car, SUV, truck or van. First thing is a good cleaning, especially underneath. If you live where salt and brine are used on the roads, it's important to get that off.  One thing to note… if you hose off your undercarriage, be careful not to get your spark plugs/wires wet.  You could notice your vehicle running rough plus the Check Engine light may come on. It usually dries out quickly, but if the engine light stays on for more than a couple of days, have your service facility check it out. Next, replace your windshield wipers.  They've taken a beating through the winter. New ones will have fresh rubber and you'll see clearly (and safely) out your windshield again. Have your brakes inspected.  That salt doesn't do your brake's metal components any ... read more

You expect your heater/air conditioner to work like it should.  You have a control for temperature and one for fan speed.  You even have a control for what vents the air comes out of.  Don't be surprised one day if your blower fan develops a mind of its own and starts going crazy.  Most of the time, you may find that it starts blowing at full speed, and nothing you do to try to control it does any good.  This is what may be happening. Your blower motor has an electronic component called a resistor.  It does what its name says; it offers resistance.  When you want the fan to run more slowly, you turn the fan speed down.  That resistor accomplishes that by turning its resistance up.  When the resistor fails, the power has nothing to slow it and the fan speeds up.  It's a small part and can fail due to age or corrosion.  It's usually not an expensive part, either, but it's often found in a location that's not that easy for the technic ... read more

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around.  A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads. Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since the ... read more

Ever wonder what one of the best things is to ever happen to your vehicle's engine?  It's the little thing that usually looks like a can, the oil filter. Just like your kitchen sink strainer filters out errant particles of food from clogging your drain, the oil filter cleans out small particles that could cause your engine harm. Your engine operates in a dirty, hot environment and gathers a lot of tiny contaminants like dirt, dust, little metal shards and unlucky bugs that get sucked in.  Get those things circulating in your engine and those little particles can cause friction, which starts wearing out those finely machined metal parts.  You know how important it is to change your oil regularly.  It's vital that you change your oil filter at the same time to keep the oil as close to brand new as possible. Most oil filters look like a metal can with some holes in the bottom.  Inside there are carefully chosen materials that can screen out the contaminants while ... read more

If there’s one thing you should pay attention to with your vehicle, it’s the temperature gauge. It’s the one that may say C---H (that means “cold---hot”).  Or maybe yours has a picture of a thermometer on it and a blue and red zone.  If you see the needle heading farther to the “H” or red area, that means your vehicle’s engine is running hotter than it normally does. One of the most common causes of an engine running hot is a leak in your cooling system.  Maybe you’ve seen puddles of coolant under your vehicle, or you’ve smelled the coolant, either inside or outside your vehicle (it has a sort of “sweet” or fruity smell). That’s your engine giving you a warning signal that it’s time to head over to your repair facility to find out what’s going on. Your vehicle’s coolant can leak for several reasons.  You may have hoses that are deteriorating (heat and age take their toll) ... read more